Quantum DXi6900 User Manual Download Page 88

Page: 88 / 400

Chapter 4: Configuration Wizards
VTL Wizard

Quantum DXi6900 User’s Guide

Figure 49:

VTL Wizard: Add Media

Step 4: Discover Remote Hosts

1. Click

Discover Remote Hosts

to list all hosts that are known to the DXi6900 (see

Figure 50 on the

A host is made known to the DXi6900 if you enter the host ID on this page, or if the host logs on to one
or more Fibre Channel target ports.

If you do not see the world wide name (WWN) of the host, make sure the host is connected to a Fibre
Channel port on the DXi6900 and click

Discover Remote Hosts

again.

The

Backpanel Locations

section displays a graphical representation of the Fibre Channel and

Ethernet ports as they appear on the rear of the system.

Note:

Active

status indicates the host is currently logged on to one or more Fibre Channel

target ports.

2. Enter information about the host:

Host Information

Description

Remote Host WWPN

Enter the World Wide Port Name (WWPN) of the host.

Alias

Enter a descriptive alias for the host

3. Click

Apply

Summary of Contents for DXi6900

















































































































































































































































































































































































































Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands

Quantum DXi6900, User Manual

Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands