Quantum DXi6900 User Manual Download Page 51

Page: 51 / 400

Chapter 2: Basic Operations
DXi6900 Node

Quantum DXi6900 User’s Guide

Note:

If a drive fails, you will be notified by a service ticket in the remote management console (see

Service Tickets on page 197

Caution:

not

remove a drive that has

not

failed. Instead, only remove a drive that has failed. If you

accidentally remove a good drive, wait 30 seconds before reinserting the drive.

Figure 21:

DXi6900 Hard Drive Carrier LEDs

1 - Drive activity indicator (green) 2 - Drive status indicator (green and amber)

DXi6900 Node 1 GbE Ethernet

Each 1 GbE Ethernet port on the DXi6900 Node rear panel has two LED indicators (see

Figure 22 below

Link indicator

Off

- Indicates the port is not connected to the network.

Green

- Indicates the port is connected to the network at maximum speed (1Gbps).

Amber

- Indicates the port is connected to the network at less than its maximum port

speed.

Activity Indicator

Blinking green

- Indicates network data is being sent or received.

Figure 22:

DXi6900 Node - 1 GbE Ethernet Port LEDs

1 - Link Indicator 2 - Activity Indicator

Summary of Contents for DXi6900

















































































































































































































































































































































































































Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands

Quantum DXi6900, User Manual

Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands