![background image](http://html1.mh-extra.com/html/quantum/dxi6900/dxi6900_user-manual_3536185102.webp)
Chapter 4: Configuration Wizards
Replication Wizard
Quantum DXi6900 User’s Guide
102
a. (Optional) Select the
Enable Cartridge based replication to this
DXi
check box to enable
Cartridge Based Replication for the partition, and then enter a
Sync ID
in the box.
The Sync ID is used to identify the source partition that will send replicated data to the target
partition. The Sync ID
must
be identical to the Sync ID of the source partition on the source system.
b. If you enabled Cartridge Based Replication, select an
Access
option:
Access Option
Description
Locked
The partition is not allowed to receive new Cartridge Based Replication data.
Unlocked
The partition is allowed to receive new Cartridge Based Replication data.
Note:
You cannot configure a partition to both send and receive Cartridge Based Replication
data.
4. Click
Apply
.
5. (Optional) To configure additional partitions for replication, repeat Steps 1–4.
6. Click
Next
to continue.
Figure 61:
Replication Wizard: VTL Partitions
Step 5: Confirm
1. Review the settings you selected to make sure they are correct. If necessary, click
Previous
to return to
a previous step to make changes (see
).
2. After you have confirmed all settings, click
Finish
. The wizard configures the DXi6900 with the settings
you selected.