![background image](http://html1.mh-extra.com/html/quantum/dxi6900/dxi6900_user-manual_3536185238.webp)
Chapter 9: Configuration
VTL Configuration
Quantum DXi6900 User’s Guide
238
Remote Host Mapping
The
Remote Host Mapping
page allows you to view information about existing host access groups. You
can also add or edit groups, and delete groups.
Host access groups allow backup hosts to access virtual devices on a DXi6900. A host access group is
associated with a partition, a host (a Fibre Channel initiator on the SAN), and a target (a Fibre Channel port
on the DXi6900). This association allows the host to access one or more devices in the partition using
different host LUNs on the port. To allow multiple hosts to access devices that belong to the same partition,
you must create separate host access groups for each host.
To access the
Remote Host Mapping
page, on the
Remote Host Access
page, click the
Remote Host
Mapping
).
Figure 149:
Remote Host Mapping Page
Tasks
Use the
Remote Host Mapping
page to perform the following tasks:
l
View information about existing host access groups (see
Remote Host Mapping And Groups below
).
l
Add a new host access group to a partition (see
Adding a Remote Host Access Group on the next
).
l
Edit properties for an existing host access group (see
Editing a Remote Host Access Group on page
).
l
Delete a host access group from a partition (see
Deleting a Remote Host Access Group on page
).
Remote Host Mapping And Groups
The
Remote Host Mapping And Groups
section displays the following information for all host access
groups on the DXi6900:
Group Name
The name of the group.
Remote Host
The host (initiator) associated with the group.