Chapter 9: Configuration
VTL Configuration
Quantum DXi6900 User’s Guide
243
If you do not see the world wide name (WWN) of the host, make sure the host is connected to a Fibre
Channel port on the DXi6900 and click
Discover Hosts
again.
The
Backpanel Locations
section displays a graphical representation of the Fibre Channel and
Ethernet ports as they appear on the rear of the system.
Note:
A mapped (green) status indicates the host is currently logged on to one or more Fibre
Channel target ports.
2. Enter information about the host:
Remote Host WWPN
Enter the World Wide Port Name (WWPN) of the host. (This value is entered
automatically by the system.)
Alias
(Optional) Enter a descriptive alias for the host.
3. Click
Apply
.
Note:
To delete a host that is no longer needed, click
Delete
next to the host. You cannot delete a host
of it is currently assigned to a host access group
Targets
Use the
Targets
page to view the current target (Fibre Channel) configuration.
To access the
Targets
page, on the
Host Access
page, click the
Targets
).
Figure 154:
DXi6900 G1 Targets Page
