![background image](http://html1.mh-extra.com/html/quantum/dxi6900/dxi6900_user-manual_3536185043.webp)
Chapter 2: Basic Operations
DXi6900 Node
Quantum DXi6900 User’s Guide
43
Figure 18:
DXi6900-S Node Front View
1
2
3
4
5
6
7
8
9
10
Table 1:
DXi6900 Node - Front Panel LED Indicators, Buttons, and Connectors
Item
Indicator, Button, or
Connector
Icon
Description
1
Power-on indicator, power
button.
The power-on indicator lights when the system power is on. The
power button controls the power supply output to the system.
WARNING:
Turning off the power removes the main power
but keeps standby power supplied to the Node. Because of
this, you must unplug the Node before servicing.
Caution:
Turning off the power without properly shutting
down the system may result in loss of data (see
and Shutting Down the DXi6900 on page 60
).
Note:
To shut down the Node in the event of an emergency,
press and hold the power button for 4 seconds.
Warning:
This may result in data loss and may cause a delay on next
startup due to a blockpool verify operation.
2
System identification
button
Press to toggle the system ID on and off. The identification
buttons on the front and rear panels can be used to locate a
particular system within a rack. When one of these buttons is
pressed, the system status indicator on the rear flashes until one
of the buttons is pressed again.