Chapter 9: Configuration
VTL Configuration
Quantum DXi6900 User’s Guide
239
Target Port
The Fibre Channel port (target) associated with the group.
Partition Name
The VTL partition associated with the group.
Devices
The number of virtual media changers (VMCs) and virtual tape drives (VTDs) associated
with the group
Note:
Click a column heading to sort the rows in the table by that column. Click the column heading
again to reverse the sort order.
Adding a Remote Host Access Group
Add a host access group to associate a VTL partition with a host (a Fibre Channel initiator on the SAN) and
a target (a Fibre Channel port on the DXi6900).
To add a host access group:
1. Click
Add
.
The
Map Remote Hosts, Define Groups
).
Figure 150:
Map Remote Hosts, Define Groups Page
2. Enter information about the host access group:
Group Name
Enter a name for the group.
Partition
Select the partition to associate with the group.
Remote Host
Select the host (initiator) to associate with the group.
Note:
You must configure a host before it is available in the
Host
drop-down box
).
