Quantum DXi6900 User Manual Download Page 103

Page: 103 / 400

Chapter 4: Configuration Wizards
Users Wizard

Quantum DXi6900 User’s Guide

103

Figure 62:

Replication Wizard: Confirm

Users Wizard

The

Users

wizard provides guided assistance for configuring the DXi6900 to create and manage the

following types of Authorized Backup Users:

OpenStorage (OST) users.

Application Specific (Oracle RMAN) users.

Path to Tape (PTT) users.

The wizard can also create and configure Share Administrators for use with Active Directory (AD).

To begin the

Users

wizard, on the

Wizards

menu, click

Users

Step 1: About

1. Read the information about the wizard (see

Figure 63 on the next page

and

Figure 64 on the next

page

2. Click

Next

to continue.

Note:

At any time while using the wizard, you can click

Previous

to return to the previous step.

Summary of Contents for DXi6900

















































































































































































































































































































































































































Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands

Quantum DXi6900, User Manual

Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands