Chapter 4: Configuration Wizards
VTL Wizard
Quantum DXi6900 User’s Guide
89
4. (Optional) To discover additional hosts, repeat Steps 1–3.
5. Click
Next
to continue.
Figure 50:
VTL Wizard: Discover Remote Hosts
Step 5: Map Remote Hosts
1. Enter information about the host access group (see
):
Host Access Information
Description
Group Name
Enter a name for the group.
Partition
Select the partition to associate with the group.
Remote Host
Select the host (initiator) to associate with the group.
Target
Select the target (port) to associate with the group.
Note:
The
Backpanel Locations
section displays a graphical
representation of the Fibre Channel and Ethernet ports as they
appear on the rear of the system. A dark border displays around the
currently selected target.
To change the LUN numbers assigned to a device, or to map virtual devices to a host, use the
Configuration > VTL > Host Access > Host Mapping
).
2. (Optional) Select the
Use CCL
check box to use the Command and Control LUN.
