quadient rena T-950, User Manual

Page: 37 / 82

SETUP & OPERATION
37
Press Pitch to enter Tab pitch, or
Press Opaque or Clear for Backing type.
Current liner type is: Opaque
Opaque Clear Pitch EXIT
If the Backing soft key is pressed.
The display will prompt you to select
Opaque or Clear as the Backing type, set tab
Pitch or EXIT.

Opaque – Select this option if tab liner has white
space between tabs. See chart below.

Clear - Select this option if tab liner has black
space (line) between tabs. See chart below.

Pitch - This soft key is used to set the Pitch.
See details below.

EXIT – Brings you back to the previous
screen.
Use the chart below to select the Backing type (Opaque or Clear):
Tip : The selection for Backing (liner) does not denote the type of tab material. Instead, it denotes
the density of the tab and the liner it is affixed to, as compared to the space between tabs.
Instead of thinking of this setting as a backing description, it is easier to identify if the backing
(liner) has a black bar between each tab or not (Is space between tabs black or white?).
See chart below.
Backing Setting: Color of Space Between Tabs Detailed Description
Opaque White space between tabs - Clear or translucent tab material with black block, in
the liner, below each tab.
- Paper tab stock (white or colored).
- Stamps
Clear Black space between tabs Clear or translucent tab material with a black space
(line), in the liner, between each tab.
If the Pitch soft key is pressed.
The display will prompt you to “Enter tab pitch
and press SAVE key or Exit.
Pitch = distance from top of tab/stamp to top of
next tab/stamp, or distance from top of black
bar/box to top of next black bar/box, plus 0.010”.
Important! You must add 0.010 inches to the
measured value and enter this Total as the Pitch.
Example:
Measured Value + 0.010 inches = Total (value to enter as Pitch)
1.00” + 0.010” = 1.010”
Select option to edit, or
Press RUN to tab using Job 2.
Status: Job Setup
# Tabs Offset Backing EXIT
Enter tab pitch and press SAVE key.
0.0” Current Value: 1.010”
EXIT
Press Pitch to enter Tab pitch, or
Press Opaque or Clear for Backing type.
Current liner type is: Opaque
Opaque Clear Pitch EXIT