quadient IX-7 User Manual Download Page 61

Page: 61 / 380

Press

. System motors start running.

Insert the mail piece into the mail path against the rear-guide wall, side to be

printed facing upwards.

The Mailing System applies the imprint and the mail piece is sent to the catch tray.

How to Set [Pass Through] Mail processing

This section describes how to use the

[Pass Through]

type of imprint, for:

• Sealing envelopes using the auto-feeder sealer (if installed).

• Only conveying mail, for counting or testing purposes.

Main setting:

| Page 56 | Jun-22-2021 11:01 |

Processing

Mail

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands