quadient IX-7 User Manual Download Page 375

Page: 375 / 380

Operating Conditions

14.3

Temperature and Relative Humidity

Your Mailing System should only be operated in the following conditions:

Ambient temperature: +10°C - +40°C.

Temperature range

80% max. without condensation.

Relative humidity

Weighing accuracy

To obtain the best weighing results, use a solid and steady table:

• Away from any doors

• Away from any fan

Dynamic Scale Environment

The Dynamic Scale uses optical sensors: do not install it in an

area exposed to excessive light or heat sources.

370

| Page 370 | Jun-22-2021 11:01 |

Specifications

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands