quadient IX-7 User Manual Download Page 361

Page: 361 / 380

How to Clear Mail Jammed in the Mixed-Size Feeder

Some envelopes are blocked in the Mixed-Size Feeder.

• Mail piece is too thick.

• Mail size is incorrect.

• Too many envelopes are on the feed deck.

• Envelopes are not properly stacked on the feed platform.

• Sealing is ON while feeding closed envelopes.

To clear mail jammed in the Mixed-Size Feeder:
1.

Open feeder cover.

Push the left of the upper blue release lever to lift up the upper drive assembly.

If necessary, lift up the brush release lever.

356

| Page 356 | Jun-22-2021 11:01 |

Troubleshooting

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands