quadient IX-7 User Manual Download Page 336

Page: 336 / 380

How to Clean the Cartridge Manually

If automatic cleaning is not sufficient, you can clean the cartridge manually.

To clean the cartridge manually:
1.

Open the cover: the ink cartridge moves to the replacement position.

Keep fingers away from the ink cartridge while it is moving to

the replacement position.

Press down on the back of the ink cartridge to disengage it.

Remove the ink cartridge (see

How to Change the Ink Cartridge

on page 325).

Clean the cartridge with a soft damp cloth.

Maintaining

331

| Page 331 | Jun-22-2021 11:01 |

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands