quadient IX-7 User Manual Download Page 363

Page: 363 / 380

Do not lean on or leave any object on the Dynamic Scale

Platform as it may alter its weighing accuracy.

How to Clear a Label Jammed in the Base

Actions

Possible causes

Clear the label as indicated below.

A label is blocked in the Automatic

Label-Dispenser or in the transport

mechanism of the system base.

To clear a label jammed in the Base:
1.

Remove all labels from the dispenser.
Check that there is not label stuck in the bottom of the dispenser.

Pull the release handle located underneath the base to lower the transport belts

and wheels. Hold the handle.

Using your other hand, remove the jammed label.

Release the jam release handle to put the transport belt and wheels back into

position.

358

| Page 358 | Jun-22-2021 11:01 |

Troubleshooting

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands