quadient IX-7 User Manual Download Page 330

Page: 330 / 380

Ink Cartridge

12.1

About the Ink Cartridge

The ink cartridge for printing is located in the mailing system and contains blue ink

that has been tested and approved by the postal service.
The ink cartridge uses ink jet technology. It requires the cartridge nozzles to be cleaned

regularly to provide a good printing quality. The system performs cleaning automatically

or on your request. You can also clean the cartridge manually if the automatic cleaning

is not sufficient.
The ink cartridge also has to be aligned.

How to Change the Ink Cartridge

If after cleaning, you still observe poor print quality (streaked, too light, blurred, etc.)

or the system indicates the ink cartridge is out of ink ... it is time to replace the ink

cartridge.

325

| Page 325 | | Jun-22-2021 11:01 |

Maintaining

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands