quadient IX-7 User Manual Download Page 338

Page: 338 / 380

Press

[Perform an imprint test]

and put a piece of paper in the mail transport.

The system prints a test pattern.

Check the printed pattern and press the letter that corresponds to the straightest

and complete vertical line.

Press

[OK]

to validate.

Repeat the previous step until lines

are aligned.

Ink Management Service

The Ink Management service sends an electronic message to the Online Services server

when the mailing machine’s ink supply is running low.
An e-mail message then informs you of that condition so that the ink cartridge can be

replaced in time.

For more information, please contact your Customer Service.

Maintaining

333

| Page 333 | Jun-22-2021 11:01 |

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands