Qsan XEVO 2.2 Software Manual Download Page 46

Page: 46 / 109

XEVO

Software Manual

Storage Tab

Official

Document



Online: The volume is online.



Offline: The volume is offline.



Erasing: The volume is being erased.



Initiating: The volume is being initialized.



Rebuilding: The volume is being rebuilt.



Migrating: The volume is being migrated.



Rollback: The volume is being rolled back.



Parity Checking: The volume is being parity check.



Relocating: The volume is being relocated.



EE Rebuilding: The volume is being RAID EE rebuilt.

Snapshot space

Used snapshot space / Total snapshot space. The first capacity is
current used snapshot space, and the second capacity is
reserved total snapshot space.

Capacity

Total capacity of the volume.

Usage

(This option is

only visible when the

pool type is thin

provisioning or auto

tiering)

Total usage of the volume.

Available

(This option

is only visible when

the pool type is thin

provisioning or auto

tiering)

Total available space of the volume.

LUN

Display LUN (Logical Unit Number) or “-“ as none.

Cache Mode

The cache mode of the volume:



Write-through Cache.



Write-back Cache.

Summary of Contents for XEVO 2.2














































































































Search results

Summary of Contents for XEVO 2.2

Reviews:

Related manuals for XEVO 2.2

Brands by name

Popular brands

Qsan XEVO 2.2, Software Manual

Search results

Summary of Contents for XEVO 2.2

Reviews:

Related manuals for XEVO 2.2

Brands by name

Popular brands