XEVO
Software Manual
Messages Tab
© 2022 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
89
When finished, click the
Apply
button to tack effect. Or click the
Reset to Default
button to
reset settings.
INFORMATION
The device buzzer features are listed below:
The buzzer alarms 1 second when system boots up successfully.
The buzzer alarms continuously when there is error occurred. The alarm
will be stopped after error resolved or be muted.
The alarm will be muted automatically when the error is resolved. For
example, when a RAID 5 pool is degraded and alarm rings immediately,
user replaces one disk drive for rebuild. When the rebuild process is
done, the alarm will be muted automatically.
10.2.3.
SNMP Settings
Click the
SNMP
pane to be used to setup SNMP (Simple Network Management Protocol) traps
for alerting with event logs and also setup SNMP server settings for client monitoring.
SNMP Trap
Enable SNMP Trap:
Check to enable SNMP trap to send system event logs to SNMP trap
agent. The default SNMP trap port is 162. You can check or uncheck the alert levels which
you would like to receive. And then fill in up to three SNMP trap addresses for receiving the
event notifications.
SNMP Server
SNMP Version:
Select SNMP supported versions: v1/ v2, or v3. If select SNMP v3, it needs
more options for authentication. Please enter a username, select an authentication
protocol and enter an authentication password, check to use privacy if necessary, select a
privacy protocol, and enter a privacy password.
