Qsan XEVO 2.2 Software Manual Download Page 39

Page: 39 / 109

XEVO

Software Manual

Storage Tab

Official

Document



Abnormal: The pool is unhealthy and incomplete. The cause
may be a disk loss or failure.



Warning: The pool has failed.

Status

The status of the pool:



Online: The pool is online.



Offline: The pool is offline.



Rebuilding: The pool is being rebuilt.



Migrating: The pool is being migrated.



Relocating: The pool is being relocated.



EE Rebuilding: The pool is being RAID EE rebuilt.

Controller

The current running controller of the pool.

Actual Space

Total capacity of the pool.

Available Space

Available capacity of the pool.

Provisioning Type

The provisioning type of the pool:



Thick Provisioning.



Thin Provisioning.



Auto Tiering (Thin Provisioning)



Auto Tiering (Thick Provisioning): The type is thick
provisioning transferred to auto tiering.

Click the icon beside the pool name to list the drop down options. These options are
available in the pool.

Rename

Click the

Rename

option to rename the pool.

Enter a new

Pool Name

. The maximum length of the pool name is 15 characters. Valid

characters are [ A~Z | a~z | 0~9 | -_<> ].

Click the

Apply

button to rename.

Summary of Contents for XEVO 2.2














































































































Search results

Summary of Contents for XEVO 2.2

Reviews:

Related manuals for XEVO 2.2

Brands by name

Popular brands

Qsan XEVO 2.2, Software Manual

Search results

Summary of Contents for XEVO 2.2

Reviews:

Related manuals for XEVO 2.2

Brands by name

Popular brands