XEVO
Software Manual
Getting Started
© 2022 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
8
Figure 2-1 XFinder Utility
Take an example in Figure 2-1, XFinder discovers two systems in LAN. The default setting of the
management port IP address is gotten from the DHCP server, e.g., 192.168.30.242. The default
system name is the model name plus the last 6 digits of the serial number, e.g., XF2026-D60000.
Double-clicking the selected entry will automatically bring up the browser and display the login
page.
INFORMATION
XFinder utility works in the following network environments:
Both the management port of the SAN storage system and the
management computer are both on the same subnet domain of the LAN.
The LAN works with or without DHCP server.
If the LAN doesn’t have a DHCP server, it still can work on zero-
configuration networking. The management port will be assigned a fix IP
address: 169.254.1.234/16. So you can configure the IP address of your
management computer to the same subnet domain of the storage
system, e.g.: 169.254.1.1/16. Then open a browser and enter
to go into the login page. For more information
about zero configuration, please refer to:
https://en.wikipedia.org/wiki/Zero-configuration_networking
