XEVO
Software Manual
System Tab
© 2022 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
73
Enable Dual Management Ports
This is for dual controller models. When the setting is enabled, both management ports of the
controllers have their own IP addresses and MAC addresses, and both are active. If the setting
is disabled, only the management port of the master controller is active, the other one is on
standby. Both controller management ports share the same IP address and MAC address. The
management port fails over to the slave controller when the master controller goes offline,
either planned or unplanned.
Main Controller
MAC Address:
Display the MAC address of the management port.
Type:
The option can change IP address for remote administration usage. There are three
options for
DHCP
,
BOOTP
, or
Static IP Address
.
DNS Server Address:
DNS (Domain Name System) provides a means to translate FQDN
(Fully Qualified Domain Name) to IP address. Some notification services need DNS setting.
Enter an IP address of DNS server here.
Service Ports
Uncheck to disable the service ports of
HTTP
,
HTTPS
, and
SSH
.
If the default port numbers
of the service ports are not allowed on your network environment, they can be changed
here.
When finished, click the
Apply
button to take effect.
9.2.5.
Configure QoS Settings
Click the
QoS Settings
pane to configure QoS (Quality of Service) settings. For more information,
9.3.
Configure Data Port Settings
Select the
System
tab and the
Data Ports
subtab to configure iSCSI or fibre channel data ports.
