Qsan XEVO 2.2 Software Manual Download Page 43

Page: 43 / 109

XEVO

Software Manual

Storage Tab

Official

Document

Total

Total capacity of the disk group.

Disks

The quantity of disk drives in the disk group.

RAID

The RAID level of the disk group.

RAID EE Spares

The quantity of RAID EE spare disk drives in the disk group.
Traditional RAID level is display as N/A.

The options are available in this pane.

Add a Disk Group

Here is an example to add a disk group. Please refer to the

Extending the RAID Pool Tutorial

Delete Disk Groups

Check the disk group checkboxes which you want to delete.

Click the icon to continue. Then click the

Apply

button to confirm and delete.

CAUTION

If the pool contains only one disk group, it cannot be deleted. If the disk
group is being used and not empty, it also cannot be deleted.

Click the icon beside the number of the disk group to list the drop down options. These
options are available in the disk group.

Disk Information

Click the

Disk Information

option to display the disk information in the disk group.

Click the

Close

button to close the window.

High Latency Disk Warning

Click the

High Latency Disk Warning

option to change the property of the disk group.

Summary of Contents for XEVO 2.2














































































































Search results

Summary of Contents for XEVO 2.2

Reviews:

Related manuals for XEVO 2.2

Brands by name

Popular brands

Qsan XEVO 2.2, Software Manual

Search results

Summary of Contents for XEVO 2.2

Reviews:

Related manuals for XEVO 2.2

Brands by name

Popular brands