XEVO
Software Manual
System Tab
© 2022 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
81
UPS
Check the
Enable UPS Support
checkbox to enable UPS supported. Now we support network
UPS via SNMP, Serial UPS with COM port, and USB UPS.
Communication Type:
Now we support network UPS via SNMP, Serial UPS with COM port,
and USB UPS.
Shutdown battery Level:
If the power is shortage, the system will execute shutdown
process when reaching the UPS battery level.
If Communication Type selects SNMP:
SNMP IP Address:
Enter the IP address of the network UPS via SNMP.
SNMP Version:
Select SNMP supported versions: v1, v2c, or v3. Please enter community if
select SNMP v1 or v2c. If select SNMP v3, it needs more options for authentication. Please
enter a username, check to use authentication if necessary, select an authentication
protocol and enter an authentication password, check to use privacy if necessary, the
privacy protocol supports DES, and enter a privacy password.
If Communication Type selects Serial:
UPS Manufacturer:
Select the UPS manufacturer.
UPS Model:
Select the UPS model.
When finished, click the
Apply
button to take effect.
This table shows the UPS status.
Table 9-3 UPS Status Descriptions
COLUMN NAME
DESCRIPTION
UPS Status
The status of UPS:
On Line
: The UPS is online.
On Battery
: The UPS is on battery.
Low Battery
: The voltage of the battery is low.
High Battery
: The voltage of the battery is high.
Replace Battery
: The battery needs to be replaced.
