XEVO
Software Manual
Protection Tab
© 2022 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
62
Stop Task
1.
Click the icon of the volume to stop the replication task.
Ungroup
2.
Check the volume checkboxes which you want to ungroup.
Click the
icon to pop up a confirm dialog box.. Then click the
Apply
button to confirm and
ungroup.
Connection Properties
1.
Click the icon beside the volume name to list the drop down options. Click the
Connection Properties
option to enable multipath and add connections.
2.
Check the
Enable MultiPath
option if necessary, and then select the
Source Port
and enter
a
Target IP Address
.
3.
Or click the
Add Connection
button to add another connection. Select the
Source Port
and
enter a
Target IP Address
.
4.
If the connection is not stable, click the
icon to reconnect the connection.
5.
Click the
Apply
button to take effect.
Snapshot Center
Click the icon beside the volume name to list the drop down options. About the
Snapshot
Center
option, please refer to the chapter 7.2.4,
7.2.7.
Traffic Shaping
The traffic shaping function can help reserve the necessary bandwidth for non-replication I/O
operations. Eight shaping groups can be set. In each shaping group, peak and off-peak time
slots are provided for different bandwidths. Here is an example to configure traffic shaping.
Please refer to the
Setup Traffic Shaping Tutorial
7.2.8.
Switch Local Clone to Remote Replication
Through local-to-remote, you can transfer local backup to remote sites without redoing full
copy. You can plug and play when local-to-remote without any configurations. Here is an
