QMS Magicolor CX, User Manual

Page: 131 / 222

Repacking the
Printer
3-55 Maintenance
3 Remove the oil bottle.
After removing the oil
bottle, the bottle may
leak slightly, so place it
in an oil-proof con-
tainer, such as a plastic
bag, until you are ready
to reinstall it after the
move.
4 Close the oil bottle retainer, making sure the spring latch is
securely in place.
5 Grasp the fuser unit
by the two handles,
one at each end, and
lift it up and out of the
printer.
M
WARNING! The fuser
unit can become
extremely hot and
cause severe burns.
Make sure the unit is
cool before handling it.
ACHTUNG! Die Fixiereinheit kann sehr heiß werden, so daß
Verbrennungsgefahr besteht. Bitte lassen Sie die Fixiereinheit
einige Zeit abkühlen, bevor Sie diese berühren.
Rear View
Rear View