QMS Magicolor CX, User Manual

Page: 190 / 222

Testing Printer-
to-Host
Communication
QMS magicolor CX User's Guide 4-48
8 Press the Select key.
The message window momentarily displays
RATE
IS SELECTED
(where
RATE
is the baud rate you selected) and then
SERIAL
BAUD RATE
If you want to change other settings, use the Next key to scroll to
the setting you want to change, then repeat the procedure
described in steps 6 through 8 for finding and selecting new set-
tings.
9 When you have finished making changes, press the Online/
Offline key.
The message window displays
SAVE CHANGES?
NO
To save your changes, press the Next key so that the message
window displays
SAVE CHANGES?
YES
Press the Select key to save the changes.
10 Press the Online key.
The Online LED lights, and the keyboard message window dis-
plays
IDLE
.
11 To verify the changes you just made, print a start-up page by
turning the printer off, then back on. Compare the serial port
settings listed on the page to those in your AUTOEXEC.BAT
file.
12 Try the communication test again. If a blank page ejects from
the printer, the printer and the computer are communicating.