QMS Magicolor CX, User Manual

Page: 159 / 222

Print Quality
Problems
4-17 Troubleshooting
3 Locate the adjustment dials inside the printer near the front
left side. Each dial adjusts the print density for one of the
four colors: K for black, C for cyan, M for magenta, and Y for
yellow
.
a If they’re in the default center position, then go to step 5.
b If they’re not in the default center position, turn each density
adjustment dial either clockwise or counterclockwise,
depending on its current setting, until it is in the default middle
position and go to step 4.
Y
M
C
K
Print Density
Dials