QMS Magicolor CX, User Manual

Page: 128 / 222

Repacking the
Printer
QMS magicolor CX User's Guide 3-52
Remove the Toner and Developer Cartridges
1 Remove the printer’s top cover.
2 Remove the black
toner cartridge.
a Holding the toner
cartridge across its
center, squeeze the
sides to loosen the
pins on the back
side from the
developer cartridge
notches.
b Lift the toner cartridge straight up and out of the printer.
3 Set the toner cartridge aside.
Place it on a level surface on a large sheet of paper to catch loose
residue.
4 Lift up the two green
latches (one at each
end) of the developer
cartridge, and release
the cartridge by press-
ing back on the
latches behind the car-
tridge while pulling
forward on the
cartridge.
Rear of Printer