QMS Magicolor CX, User Manual

Page: 166 / 222

Printer Status
Messages
QMS magicolor CX User's Guide 4-24
REPLACE BELT
The OPC belt cartridge needs to be
replaced. After installing the new
cartridge, you have to clear this
message through the control panel
using the Clear Warning option. (See
chapter 3, “Maintenance,” for details on
replacing the OPC belt cartridge and
“Clearing Warning Messages” in
chapter 1, “Printer Configuration,” in
the reference guide for details on
clearing the warning.)
SIDE PANEL OPEN
The waste toner cover is not fully
closed. Close the cover.
TOP COVER OPEN
The top cover of the printer is either off
or partially open. Make sure it is seated
properly and fully closed.
x TONER EMPTY
A toner cartridge is empty. The x is
replaced by the color of the toner
cartridge that needs to be replaced.
(See chapter 3, “Maintenance,” for
information on replacing a toner
cartridge.)
WAITING ON INPUT END JOB?
The printer compiler is waiting on
incoming data for the first job in the job
queue. It is possible that the job did not
end with an end-of-job indicator and
therefore cannot end by itself. The
message is displayed in case you want
to cancel the job or send an end-of-job
indicator. The message disappears if
more input arrives from the port, if the
relevant specified timeout elapses, or if
you send an end-of-job indicator. No
other jobs can be printed until this job
has ended.