QMS Magicolor CX, User Manual

Page: 110 / 222

Cleaning the
Printer
QMS magicolor CX User's Guide 3-34
19 Insert the wire cleaner into the recess on the AC-charger
unit, and slide the cleaner back and forth.
20 Clean the inside corners of the AC-charger unit with cotton
swabs.
21 Reinstall the AC-charger.
Slide the left side of the charger into the slot before lowering the
right side of the charger. Press the release latch outwards while
seating the right side, then release the latch to secure the charger
in place.
22 Replace the wire cleaner in the OPC belt cartridge.
23 Swing the three brass latches back over the charger unit to
hold it in place.
24 Make sure the green handle on the end of the OPC belt car-
tridge is turned up (unlocked).