background image

1-11

Connecting the Printer

Installing

Macintosh

Printer Drivers

Installing the QMS GX Driver

If you have QuickDraw GX, Apple’s new imaging technology, installed 
on your Macintosh, you should install the QMS GX driver for your 
printer. QuickDraw GX provides innovative typographic, graphic, and 
printing features. The QMS GX driver allows your QMS printer to take 
full advantage of all of these features.

»

Note: 

You cannot use the GX driver and the LaserWriter driver at the 

same time.

To be able to use the GX drivers, you must have QuickDraw GX and 
at least System 7.1 (preferably 7.5) installed on your Macintosh. See 
your Macintosh documentation for more information. 

»

Note: 

To avoid losing any data, make sure you close any open files or 

applications before installing the QMS GX driver, because the 
Macintosh reboots when installation is complete.

1

With the Macintosh on, insert the QMS GX Drivers diskette 
into the disk drive.

2

In the QMS GX Drivers disk window, double-click the QMS 
GX Drivers Installer icon to open the Installer.

3

In the QMS GX Drivers Installer dialog box, verify the Install 
Location.

To change the Install Location you can either use the drop-down 
list box to display and select the appropriate disk, or you can 
choose the Switch Disk button to scroll through the available 
disks.

4

Choose Easy Install or Custom install.

n

Easy Install automatically installs all of the GX drivers avail-
able on the disk for QMS printers.

n

Custom Install allows you to select the GX driver(s) for the 
specific QMS printer(s) you want to install. For example, if 
you wanted to install the GX drivers for the 

magicolor

 CX, but 

not for the other listed QMS printers, you would click the 
check box next to this driver only.

Summary of Contents for Magicolor CX































































































































































































































Reviews: