QMS Magicolor CX, User Manual

Page: 163 / 222

Printer Status
Messages
4-21 Troubleshooting
CHECK WASTE TONER
The waste toner pack is full and needs
to be replaced or is not installed
properly. Make sure the pack is not full,
and that it sits loosely in its
compartment, not wedged under the
top of the compartment. See
“Replacing the Waste Toner Pack” in
chapter 3, “Maintenance,” for details.
CLOSE MANUAL FEED TRAY
The manual feed tray is open when a
file is being sent to print from another
cassette. Close the manual feed tray.
COPIER OPTION
NOT INSTALLED
The Select/Copy key was pressed
while the printer was on-line, but the
CrownCopy option is not installed.
x DEV LOW
A developer cartridge is running low
and needs to be replaced. The
x is
replaced by the color of the developer
cartridge that needs attention. After
installing the new cartridge, you have
to clear this message through the
control panel using the Clear Warning
option. (See chapter 3, “Maintenance,”
for details on replacing the developer
cartridge and on clearing the warning.)
x DEVELOPER UNIT
MIS- INSTALLED
A developer cartridge is not installed or
installed incorrectly. The
x is replaced
by the color of the developer unit that
needs attention. Either install a
developer cartridge if one is not
present or reinstall the current one
correctly. (See chapter 3,
“Maintenance,” for information on
replacing the developer cartridge.)