QMS Magicolor CX, User Manual

Page: 64 / 222

Other Printing
Tasks
QMS magicolor CX User's Guide 2-36
Cancelling a Print Job
Press the control panel keys in the order shown in the following
instructions to cancel a print job.
Ending a Print Job
If the first print job in the queue is waiting for, but not receiving the
data it needs to finish printing, the message window displays
WAITING FOR INPUT
END JOB?
Use the following procedure to end all print jobs in the queue that are
waiting for incoming data.
» Note: This procedure does not end a print job that is still receiving
data. Its only purpose is to provide an end-of-job indicator for a print
job that does not have one. You can identify an end-of-job indicator in
the Administration/Communications/Parallel and Administration/
Communications/Serial menu. (See chapter 1, “Printer
Configuration,” in the reference guide for more information). Also see
chapter 3, “Technical Specifications,” in the reference guide for a
complete discussion of End Job Mode.
Press
this key to... The message window
reads...
Cancel Access the Cancelling Job menu. You
are prompted for confirmation that you
want to cancel the print job.
CANCELLING JOB?
YES
Cancel
or Select Select Yes.
YES
IS SELECTED
Cancel all print jobs in the queue that
are currently printing, interpreting, or
terminating. The
CANCELLING JOB
message displays until the print job is
completely removed from the printer.
CANCELLING JOB