QMS Magicolor 2 Desklaser, Install Manual

Page: 31 / 60

1 Take a stack of about 250 sheets (½ ream).
» Note: Don’t unpack the media above the printer as this might cause media
particles to fall into the printer.
2 Holding the stack with one hand, fan the sheets with the other hand.
This gets air through the sheets and prevents static buildup.
If you’re loading other media types, see “Using Media Other Than Paper” on page
3-6 in the
User’s Guide .
3 Take off the top and bottom sheets.
These sheets sometimes have residual glue buildup that could cause a
media jam.
6 Close the two lock levers by rotating
them away from you.
7 Close the printer’s front and top
covers.
8 If you have a duplex model, close
the duplexer’s rear cover.