++
!,+
5
Remove the protective sheet from
the cartridge.
»
Note:
The white powder lubricant on a
new OPC belt is normal; it won’t affect
quality.
6
Pull out the two tension-release pins
(one on each side of the cartridge).
»
Note:
Save the spacers in case you
need to repack the printer for relocation
or shipping later.
7
Holding the cartridge above the
printer, align the guide pins on the
cartridge with the guide slots in the
lock levers.
The white gear on the cartridge goes to
the right, and the green surface of the
cartridge faces you.
8
Gently guide the cartridge into the printer.
Caution:
The cartridge should slide easily into the printer. Don’t force it.
Summary of Contents for Magicolor 2 Desklaser
