QMS Magicolor 2 Desklaser, Install Manual

Page: 40 / 60

++/)
%
b If you’re sharing your printer with a Windows NT 4.0 workstation,
choose OK and skip to step 17.
If you’re sharing your printer with a Windows 95/98 workstation, in
the Alternate Drivers list box, select the Windows 95/98 operating system,
and choose OK.
If the operating system on your computer does not have the QMS
magi-
color 2 DeskLaser printer driver for Windows 95, you’ll be prompted to
install it: Insert the QMS magicolor 2 DeskLaser Documentation and Soft-
ware CD-ROM, and choose OK.
The required files are copied to the appropriate directory.
17 When asked if you would like to print a test page, choose either Yes or No,
and then choose Finish.
The Windows NT 4.0 printer driver installs, and then the Windows desktop
appears.
18 Remove the CD-ROM from the computer, and store it in a safe place.
$
» Note:
If you connected your printer via the parallel port, you can skip this section. The
QMS Network Print Monitor is used only with printers connected to an Ethernet
network.
The QMS Network Print Monitors (QMSMON) for Windows 95/98 and Windows NT
4.0 are designed specifically for QMS printers using TCP/IP protocol to transport print
jobs and access printer status information.
) *+,*-
» Note: If you’re using Windows NT 4.0, refer to the installation instructions on page 39.
The QMS Network Print Monitor is installed on your Microsoft Windows 95/98 work-
station or server.
» Note: You must be logged on as a member of the Administrator group to install the
QMS Network Print Monitor. Also, the TCP/IP network software must be installed.