QMS Magicolor 2 Desklaser, Install Manual

Page: 36 / 60

++%
&
" #
) *+,*-. /
Windows 95/98 and the parallel port on the QMS
magicolor
2 DeskLaser both support
Plug and Play technology, which lets your PC and its attached devices work together
automatically. After you’ve connected the printer to the PC and plugged it in, the
correct printer driver is automatically selected for you when you perform the following
procedure.
» Note: If you’re using an Ethernet network connection, refer to the next section,
“Windows 95/98 (Ethernet Connections),” for information on installing the printer
driver.
1 If it’s on, shut down your PC in the usual way.
2 Turn on the printer (the power switch is on the left side).
The printer goes through an initialization warmup and self-testing that lasts
less than 2 minutes. When the warmup is complete,
Idle
displays in the mes-
sage window.
3 Turn on the PC.
4 A message window informs you
New Hardware Found
, and then you’re
prompted to insert the printer driver disk.
5 Insert the QMS magicolor 2 DeskLaser Documentation and Software
CD-ROM (shipped with your printer) in the CD-ROM drive on your PC, and
choose OK to continue.
6 Follow the instructions on the screen to install the printer driver.
When the installation is complete, the Windows 95/98 desktop appears.
7 Remove the CD-ROM from the PC, and store it in a safe place.