++%
15 Continue following the instructions in the Add Printer Wizard.
16 When the installation is complete, exit from the Printers window.
17 Remove the CD-ROM from the PC, and store it in a safe place.
) 0123
Caution:
If you plan to use the QMS Network Print Monitor, it should be installed
before installing the QMS magicolor 2 DeskLaser printer driver. See “Install a Network
Print Monitor” on page 34.
Because Windows NT 4.0 doesn’t support Plug and Play technology, you must install
the printer driver manually as follows.
1
Insert the
QMS magicolor 2 DeskLaser Documentation and Software
CD-ROM (shipped with your printer) into the CD-ROM drive on your PC.
2
In the Windows NT Start menu, choose Settings.
3
In the Settings menu, choose Printers.
4
In the Printers window, double-click the Add Printer icon.
The Add Printer Wizard opens.
5
When prompted, choose My Computer to identify how the printer is
attached to your workstation, and then choose Next.
My Computer means Local Printer. This is the appropriate choice whether you are
connecting the printer directly to your computer via the parallel port or to a net-
work via the Ethernet port.
6
When prompted, select the appropriate port to use with the printer, and then
choose Next.
7
When prompted to select a manufacturer and model of printer, choose Have
Disk.
8
In the Install from Disk dialog box, choose Browse...
9
Locate the drive in which you installed the CD-ROM in step 1.
Summary of Contents for Magicolor 2 Desklaser
