QMS Magicolor 2 Desklaser, Install Manual

Page: 17 / 60

$ %
4 Remove any tape securing the front and top covers.
5 If you have a duplex model, remove any tape
securing the duplexer’s rear cover.
If not, skip to step 8.
6 Open the duplexer’s rear cover.
7 Remove the packing materials and tape
inside the duplexer.
Reach into the duplexer’s rear cover to access
the printer’s rear cover.
8 Remove any tape securing the printer’s rear
cover.
9 Pull the handle on the printer’s rear cover to
open it.
» Note: The illustrations for steps 9 through 21
show the printer without the duplexer. However,
the instructions are the same for both models.
10 Remove any packing material from the
printer’s rear cover.
11 Close the printer’s rear cover.