QMS Magicolor 2 Desklaser, Install Manual

Page: 26 / 60

++
!,+
&
2 If you have a duplex model, open the
duplexer’s rear cover.
If not, skip to step 3.
Caution: If you have a duplex model,
make sure you have opened the
duplexer’s rear cover before opening
the top of the printer. Forced opening of
the top cover first may damage the unit.
3 Pull the top latch to release the top
cover, then open the top cover.
» Note: The illustrations for steps 3
through 10 show the printer without the
duplexer. However, the instructions are
the same for both models.
4 Rotate up the two lock levers (one on
each side of the OPC belt cartridge
opening) to prepare the opening for
the cartridge.