++/)
%
9
Type the Internet Protocol Address for the port.
This address is either the unique host name or the dot notation identifier of the
network device.
If an invalid or previously used IP address (host name or dot notation identifier) is
given, the following message displays:
The port address “IP_Address”
could not be resolved on this computer
.
Accept it anyway?
Do
one of the following:
a
Select No and type another valid IP address (this is what QMS recommends).
b
Select Yes and add this address in the Network Host Name file on your
computer before you send any print jobs to the port. If a print job is sent to the
port before the address is entered in the Network Host Name file, printing of
the job fails.
c
Select Cancel to abort adding the port and to exit from the Add QMS Port
dialog box.
10 Choose OK.
11 Choose Close in the Printer Ports dialog box, then choose OK in Print
Server Properties to close the Printers dialog box.
1
From the Start menu, choose Settings.
2
Choose Printers.
3
In the Printers window click the right mouse button on an existing printer to
display the printer’s menu.
4
Choose Properties.
5
Choose the Details tab.
Host Name
A symbolic name that identifies a device. This name must exist in
your Network Host Name file and must be unique.
Dot Notation
Identifier
A unique set of four numbers, separated by periods, which
identifies a device on the intranet and/or network (for example
191.45.105.227).
Summary of Contents for Magicolor 2 Desklaser
