QMS Magicolor 2 Desklaser, Install Manual

Page: 23 / 60

++
!,+
Your printer uses four toner cartridges: black, yellow, magenta, and cyan.
1 Open the printer’s front cover.
Squeeze the latch near the upper-right corner
of the cover.
» Note:
The illustrations for steps 1 and 5 show
the printer without the duplexer. However, the
instructions are the same for both models.
2 Remove the toner cartridges from their shipping cartons.
3 Distribute the toner in the cartridges.
Holding a cartridge with both hands,
gently rock it five or six times horizon-
tally.
Caution:
Do not hold the toner
cartridge vertically.
Pull the tab on the cartridge to remove
the tape.