++/)
%
If the port name exists already, the following message displays:
The port name
“
port_name
”
already exists on this computer. Please choose
another name
. You must choose another Port Name.
»
Note:
On initial access to the Add QMS Port dialog box, whatever you type in the
Port Name text box is automatically copied to the IP Address text box. The port
name and IP address can be the same or they can be different. However, if they
are different, then first click the cursor in the IP Address text box and type it. Then
click the cursor in the Port Name text box and type it.
9
Type the Internet Protocol Address for the port.
This address is either the host name or the dot notation identifier of the network
device.
If an invalid IP address (host name or dot notation identifier) is given, the following
message displays:
The port address
“
IP_Address
”
could not be
resolved on this computer
.
Accept it anyway?
Do one of the follow-
ing:
a
Select No, and type another valid IP address (this is what QMS recommends).
b
Select Yes, and add this address in the Network Host Name file on your
computer before you send any print jobs to the port. If a print job is sent to the
port before the address is entered in the Network Host Name file, printing of
the job fails.
c
Select Cancel to cancel adding the port and to exit from the Add QMS Port
dialog box.
10 Choose OK.
11 Choose Close in Printer Ports dialog box, then choose OK in Print Server
Properties to close the Printers dialog box.
Host Name
A symbolic name that identifies a device. This name must exist in
your Network Host Name file.
Dot Notation
Identifier
A unique set of four numbers, separated by periods, which
identifies a device on the intranet and/or network (for example
191.45.105.227).
Summary of Contents for Magicolor 2 Desklaser
