QMS 2060, Operation

Page: 50 / 158

Cassette
Chaining
QMS 2060 Print System Operation 3-10
Duplex Printing Tips
n
Select paper with high opacity for duplex printing. Opacity refers
to how much paper blocks out what is written on the opposite side
of the page or how much light passes through the paper. Paper
with high opacity has low transparency. If paper has low opacity
(high transparency), then the printed data from one side of the
page will show through to the other side. For best results, test a
small quantity to make sure the opacity is acceptable.
n
For duplex printing on pre-printed letterheads, place the sheet
face-down with the bottom of the page inserted first. In the duplex
mode, the printer prints side two first, then side one.
Cassette Chaining
You may choose to have the printer automatically draw from another
input source when the current source empties. Here are four ways to
chain input sources:
n
Your application may include a specific procedure for using a
dual-cassette printer. Check your documentation.
n
The QMS Level 2 Windows printer driver allows you to select an
alternate cassette for chaining.
n
On a network, use Remote Console via QMS CrownAdmin to
select the media sources.
n
Configure the printer through its control panel. The following sec-
tion has more information.