Qlogic SANbox 3810, Interface Manual

Page: 94 / 396

Zoning Configuration
Displaying Zoning Database Information
6-2 59270-00 A
S
Displaying Zoning Database Information
A switch maintains three zoning databases:
„
Non-volatile–This zoning database is permanent and contains all zone sets,
zones, and aliases that you create and save on a switch. The zone sets in
the non-volatile zoning database are known as configured zone sets.
„
Volatile–This zoning database is temporary. This means it is not retained
across switch resets. The volatile zoning database can be the working copy
of a zone set being edited or the active zone set received from another
switch. In the latter case, this is also known as the merged zone set.
„
Active–This zoning database is the active zone set.
You can display the following information about the zoning database:
„
Configured Zone Set Information
„
Active Zone Set Information
„
Edited Zone Set Information
„
Zone Set Membership Information
„
Orphan Zone Information
„
Alias and Alias Membership Information
„
Zoning Modification History
„
Zoning Database Limits
Configured Zone Set Information
The Zoneset List and the Zoning List commands display information about the all
zone sets in the non-volatile zoning database. Enter the Zoneset List command to
display a list of the zone sets as shown in the following example:
SANbox #> zoneset list
Current List of ZoneSets
------------------------
alpha
beta