Qlogic SANbox 3810 Interface Manual Download Page 255

Page: 255 / 396

Command Reference

Set Config Security

59270-00 A

13-87

Examples

The following is an example of the Set Config Security command:

SANbox #> admin start

SANbox (admin) #> config edit

SANbox (admin-config) #> set config security

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

FabricBindingEnabled (True / False) [False]

AutoSave (True / False) [True ]

Finished configuring attributes.

This configuration must be saved (see config save command) and

activated (see config activate command) before it can take effect.

To discard this configuration use the config cancel command.

Summary of Contents for SANbox 3810













































































































































































































































































































































































































Search results

Summary of Contents for SANbox 3810

Reviews:

Brands by name

Popular brands

Qlogic SANbox 3810, Interface Manual

Search results

Summary of Contents for SANbox 3810

Reviews:

Brands by name

Popular brands