Qlogic SANbox 3810 Interface Manual Download Page 180

Page: 180 / 396

Command Reference

Capture

13-12

59270-00 A

The following is an example of the Capture Remove command:

SANbox #> admin start

SANbox (admin) #> callhome edit

SANbox (admin-callhome) #> capture remove

Capture Entries for Profile: Tech_Support_Center

Index TimeOfDay DayOfWeek Interval

----- --------- --------- --------

1 02:00 Sat 1 (weeks)

Please select a capture entry from the list above ('q' to quit): 1

The selected capture entry has been removed from profile Tech_Support_Center.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

Summary of Contents for SANbox 3810













































































































































































































































































































































































































Search results

Summary of Contents for SANbox 3810

Reviews:

Brands by name

Popular brands

Qlogic SANbox 3810, Interface Manual

Search results

Summary of Contents for SANbox 3810

Reviews:

Brands by name

Popular brands