Qlogic SANbox 3810 Interface Manual Download Page 151

Page: 151 / 396

Call Home Configuration

Managing the Call Home Database

59270-00 A

11-9

Creating a Profile

Enter the

Profile

Create command to create a Call Home profile as shown in the

following example:

SANbox #> admin start

SANbox (admin) #> callhome edit

SANbox (admin-callhome) #> profile create profile_1

A list of attributes with formatting and default values will follow.

Enter a new value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press ’q’ or ’Q’ and the ENTER key to do so.

Default Values:

Level Alarm

Format FullText

MaxSize 100000

EmailSubject <undefined>

RecipientEmail (up to 10 entries allowed)

New Value (press ENTER to accept default value, 'q' to quit):

Level (Alarm,Critical,Warn,None) :

Format (1=FullText, 2=ShortText, 3=Tsc1) :

MaxSize (decimal value, 650-100000) :

EmailSubject (string, max=64 chars, N=None) : Technical problem

RecipientEmail (ex: [email protected], N=None)

1. <undefined> : [email protected]

The profile has been created.

This configuration must be saved with the callhome save command

before it can take effect, or to discard this configuration

use the callhome cancel command.

SANbox (admin-callhome) #> callhome save

The CallHome database profiles will be saved and activated.

Please confirm (y/n): [n] y

Summary of Contents for SANbox 3810













































































































































































































































































































































































































Search results

Summary of Contents for SANbox 3810

Reviews:

Brands by name

Popular brands

Qlogic SANbox 3810, Interface Manual

Search results

Summary of Contents for SANbox 3810

Reviews:

Brands by name

Popular brands