Qlogic SANbox 3810, Interface Manual

Page: 138 / 396

Event Log Configuration
Managing the Event Log Configuration
10-4 59270-00 A
S
Configure the Event Log
You can customize what events are recorded in the switch event log according to
component, severity level, and port. Enter the
Set Log Component, Set Log Level,
and Set Log Port commands in an Admin session to filter the events to be
recorded. You can choose from the following component events:
„
E_Port events 1
„
Management server events
„
Name server events
„
Port events
„
Switch management events
„
Simple Network Management Protocol (SNMP) events
„
Zoning events
„
Call Home events
The following example configures the event log to record switch management
events with warning and critical severity levels associated with ports 0–3. Entering
the Set Log Save command ensures that this configuration is preserved across
switch resets.
SANbox (admin) #> set log component switch
SANbox (admin) #> set log level warn
SANbox (admin) #> set log port 0 1 2 3
SANbox (admin) #> set log save
Display the Event Log Configuration
Enter the Show Log Settings command to display all event log configuration
settings as shown in the following example:
SANbox #> show log settings
Current settings for log
------------------------
Started True
FilterComponent NameServer MgmtServer Zoning Switch Port Eport Snmp CLI QFS
FilterLevel Info
DisplayLevel Critical
FilterPort 0 1 2 3 4 5 6 7
1
The SANbox 3810 switch does not support E_Ports.